Glass Test Tubes in the Lab: Borosilicate vs Soda-Lime Glass
Time : Nov 21, 2026

Glass Test Tubes in the Lab: Borosilicate vs Soda-Lime Glass

Choosing the right glass test tubes requires more than comparing appearance or price. Borosilicate and soda-lime glass differ in thermal expansion, heat resistance, and chemical durability—properties that can affect laboratory workflows and testing reliability. For technical evaluators, understanding these differences is essential when assessing tubes for heating, sample handling, and routine procedures. This guide examines the key performance characteristics of both materials to help you make an informed selection for your laboratory’s intended applications.

The short answer is that borosilicate is generally the safer starting point when a procedure involves heating or significant temperature changes. Soda-lime glass can be a sensible choice for routine, unheated work where chemical compatibility has been established. Neither description, however, is a complete specification: tube dimensions, wall thickness, closures, additives and manufacturing quality also affect suitability.

What the material difference means at the bench

Borosilicate glass typically expands less with heat than soda-lime glass. That makes it more resistant to thermal shock—the stress created when different parts of a tube change temperature at different rates. In practical terms, a borosilicate tube is generally better suited to controlled heating and cooling. It is not immune to cracking, particularly if it is scratched, unevenly heated or moved abruptly between temperature extremes.

Soda-lime glass generally has higher thermal expansion. It is widely used where tubes remain close to room temperature, such as holding or transferring compatible specimens and reagents. Its lower cost can make it attractive for high-volume disposable workflows, but a low unit price is only useful if the tube performs reliably throughout the intended procedure.

Chemical durability is the other major distinction. Borosilicate generally offers better resistance to water and many chemical solutions, reducing the likelihood of material being extracted from the glass surface. That matters when a sample is stored in contact with the tube for an extended period or when an assay is sensitive to trace contamination. Resistance is not universal: strong alkalis, hydrofluoric acid and certain other conditions can attack glass. Check compatibility for the actual reagent, concentration, contact time and temperature.

Heating, cooling and reuse: check the whole procedure

For a protocol that calls for a heated reaction, specify a tube intended for that use rather than accepting “glass” as sufficient. Ask the supplier for the glass type and applicable heating guidance. A tube suitable for a water bath is not automatically suitable for direct flame, dry heat or a rapid cooling step. The cap or stopper must also be assessed separately; its temperature limits may be lower than those of the tube.

Freezing deserves the same caution. Expansion of the contents can break a glass tube even when the glass itself tolerates the temperature. Verify that both the tube and closure are intended for frozen storage, and follow the supplier’s guidance on fill volume and handling. Do not assume that a tube sold for blood collection is appropriate for heating or freezing simply because it is made of glass.

If reuse is planned, inspect tubes for chips, scratches and residue, and validate the cleaning process for the assay. Repeated use can change the condition of the glass surface. Single-use collection tubes, particularly those containing additives or a preset vacuum, should not be treated as reusable laboratory glassware.

For blood collection, the glass is only one part of the specification

A general-purpose test tube and an evacuated blood collection tube may look similar, but they are not interchangeable. Collection performance depends on the vacuum, closure, additive and intended draw volume as well as the container material. An underfilled anticoagulant tube can alter the blood-to-additive ratio, so evaluators should consider the complete collection procedure rather than the tube alone.

For example, the EDTA Tube is offered in PET or glass, with a purple cap and K2EDTA or K3EDTA additive. Listed sizes include 13 × 75 mm, 13 × 100 mm and 16 × 100 mm, with capacities from 2 to 10 mL. Its intended applications include clinical hematology, PCR diagnostics and blood group research, subject to the requirements of the particular test. The supplied information does not identify the glass as borosilicate or soda-lime, so that distinction should be confirmed before making a material-specific assessment.

A preset vacuum is intended to draw the specified blood volume when the collection procedure is followed. Confirm the acceptable fill range, mixing instructions and compatibility with the analyzer or downstream method. The purple cap helps identify the additive category, but cap color alone should not replace a check of the label and test requirements. EDTA may interfere with assays for which another specimen type or additive is required.

Where specifications often fall short

“Borosilicate” and “soda-lime” are useful starting descriptions, not substitutes for product documentation. If a method is sensitive to leachables, ask for relevant evidence for the finished tube rather than relying on a general statement about the glass family. For routine handling, check whether the rim, tube finish and closure work with the laboratory’s racks and equipment. Nominal capacity alone does not establish centrifuge compatibility; the tube, adapter, fill level and operating conditions must be appropriate together.

For laboratories and distributors sourcing across borders, consistency of documentation matters as much as the initial sample. A practical supplier discussion should establish the material, dimensions, packaging, storage conditions and any applicable product requirements in the destination market. Where the intended use is medical, ask which product-specific regulatory documentation is available rather than assuming that laboratory glassware and medical collection devices are assessed in the same way.

Before approving a substitute, run a representative evaluation: check fit in existing equipment, observe handling through the actual temperature and centrifugation steps, and compare assay results using the laboratory’s established acceptance criteria. Choose borosilicate when its thermal and chemical properties address a real workflow risk; choose soda-lime when the procedure is compatible and the finished tube meets the necessary requirements. If the supplier cannot identify the glass or substantiate a critical claim, resolve that gap before changing the specification.

    Related Posts

    Online Message

    Submit